Ask C100 Guia do Utilizador descarregar pdf

ASK Proxima C300 and C300HB (DP8000 and DP8000HB) Projectors

Frequently Asked Questions: Video

The colors on the video image are incorrect.

Do the following after attempting to adjust the color in the Picture menu. You can access the picture menu by pressing the

Menu button and navigating to Basic > Setup > Picture.

1. Reset the projector to the factory default settings. Press the Menu button. Then navigate to Basic > Setup > Service.

Select Factory Reset. Note that if you have created special settings (for example, colors and sources), these will be

reset to the original defaults.

2. Change sources. Try connecting the projector to another video source.

3. Try different cables. It could be a faulty cable. Check the cables for bent or broken pins. If any pins are damaged,

the cable will need to be replaced with an ASK Proxima-approved cable. Please contact ASK Proxima Technical

Support for part information.

4. Upgrade the projector system software. More information about software upgrades is available on the C300 Software

webpage.

5. If the projector still will not display the image, it is possible that there is an internal problem that requires repair.

Take the projector to your dealer or contact ASK Proxima Technical Support.

The image is not perfectly rectangular. ("Keystoning")

When a projected image is wider at the top or the bottom, or taller on the right or left side, we say that the image is

'keystoned'. Keystoning happens when your projector is not perpendicular to the screen, either in the vertical plane or the

horizontal plane.

Correcting vertical keystoning

If you use the elevator to tilt the front of the projector up so you can get the image higher on the wall, the image will suffer

from vertical keystoning. Likewise, if you mount the projector on the ceiling and need to tilt it to get the image on the

screen, you'll also get a keystoned image.

1. Try raising or lowering the projector. You can correct for keystoning by making sure the projector is placed

perpendicular to the viewing screen. For example, it may be necessary to place the unit on a higher surface to

correct the image. Or you can add an extension to a ceiling mount that allows you to mount the projector lower.

2. Finally, change the Keystone setting. You can use the Keystone function on the projector keypad or in the menu of

the projector to adjust the keystone digitally. You can adjust keystone between -15 to +40 degrees.

1 2 3 4

Resumo do Conteúdo

ASK Proxima C300 and C300HB (DP8000 and DP8000HB) Projectors Frequently Asked Questions: Video The colors on the video image are incorrect. Do the fo

Página 2

Keypad Press the Keystone Up arrow to reduce the upper part of the image, and press the Keystone Down arrow to reduce the lower part. You can adjust k

Página 3

Página 4

Mais documentos para Projetores Ask C100

Para ver o documento Ask C100 Manual do Utilizador

Ask C100 Manual do Utilizador (7 páginas)

Comentários a estes Manuais

Sem comentários

Ask C100 Guia do Utilizador

Consulte online ou descarregue Guia do Utilizador para Projetores Ask C100. Ask C100 User guide [en] Manual do Utilizador

Resumo do Conteúdo

Mais documentos para Projetores Ask C100

Comentários a estes Manuais

Manuais e produtos relacionados com Projetores Ask C100